Even in the sunny city of Perth, there are certain colder months when the use of swimming pools is drastically reduced, leading to neglect and irregular maintenance of the pools. As a result, when the weather get warm again, the owners find it difficult to clean up their pools on their own and scramble to find professional pool cleaners Perth to help them out. However, such a situation can be avoided if one understands how to easily and effectively clean their swimming pools in the different weathers, so as to maintain their pools all year round.
Once the peak summers are over and the water starts cooling down in autumn and subsequently in winters, the usage of swimming pools also starts coming down. As a result of less usage, the regular cleaning and maintenance of the pool also starts reducing, thereby leading to the build-up of dirt and debris in the pool. To avoid reaching a stage where your pool has completely turned green before the summer arrives, it is advisable to clean it up with the help of suitable, quick and easy to use pool equipment Perth. For small and medium sized pools, suction or pressure cleaners are good enough, while for larger pools robotic pool cleaners Perth should be used.
The best part of cleaning the pools during such “off-season” is that only very little effort is required, since the reduced usage of the pool keeps the chlorine in the water maintained, and there is only very little debris every day. As a result, the swimming pool equipment Perth that you use can do its job in a much shorter amount of time with much lesser effort on your part. Once the pool usage has completely stopped, make sure to clean out the water thoroughly and then cover up the pool properly so that no further debris falls into it.
As the spring approaches, it is time to prepare your pool again for the upcoming summers and for this, certain important steps need to be followed. First and foremost, while removing the pool cover make sure that no leaves, stones and other debris accumulated on the cover fall into the pool. After this, check the level and quality of the stored pool water. If required, add more water to the pool with a hose. After this, the next step is to check the filter pump to see it is still working fine, and if so, run the filter.
Finally, it is time to clean up the pool with a suitable pool equipment Perth. Depending on the size and shape of your pool, suction, pressure or robotic cleaners may be used. After this, run the filter for a day, and add the required chemicals which should be left to circulate for another day.