In the urban areas, the tanks get polluted often. The industrial emissions are the crucial problems because of the populated centres. Because of the potential reasons for hazards, corrective and preventive measures need to be taken at the proper time. Only the preventive procedures are able to eradicate the microorganisms from the water tanks. In this way, lives are saved without facing the worst consequences. For example, do you see small white flakes? Microbial growth needs to be blamed when the tank is not inspected in the past 2 years. Additionally, slime is caused by the same reason but it is not exactly harmful.
However, because of the harmful growth of Giardia or other bacteria, disinfection is required. Even after buying from the latest collection of rain water tanks Victoria, you may have to opt for boiling, chlorination or ultraviolet light radiation. The situation thoroughly depends upon the impurities. To understand why you need to carry out disinfection, go through the following things.
Boiling for Safe Drinking Water
In most of the rural areas of Australia, rainwater is used for drinking water. If people with HIV positive drink water of poor quality, diabetes or cancer, they may suffer from health risks. When water is boiled before consumption, the process can kill protozoa, viruses and bacteria. Boil the water and let it cool. Then pour it in two containers back and forth. When the oxygen concentration is dissolved, the issue is resolved. Nevertheless, keep in mind that rainwater is not the source of the pathogens causing illness. As rainwater is likely to get contaminated, be careful about dead rodents and birds. Before cleaning water for drinking or cooking, you need to remove the animal carcass. Chlorination is a better option, too.
Chlorination against Harmful Matter
Chlorination used for domestic tanks may not be considered in most of the scenes but it is good against Giardia. Its effect on Cryptosporidium may not be long-lasting. However, the process can get rid of odour only by oxidising the chemical matters. As chlorine is added, the compound functions with organic ingredients. Then the impurities go away. Of course, the amount of chlorine is based on concentration. When the procedure is done, don’t be afraid of drinking the water. There will be a particular taste but the odour will vanish within 10-14 days.
UV Light Radiation for Assuring Quality Water
Ultraviolet light irradiation does not require much maintenance. Additionally, chemical components are not added during the procedure. So, start the process by installing a UV light in the pipe-work that will deliver water from the tank to particular taps. However, it is essential to note that the regular UV doses restrict insufficient inactivation of the virus. The UV lamps come with a little effective life and they must be replaced between 9 to 12 months.
However, don’t be afraid of the metallic or plastic taste in the tank. This is simply caused due to a new tank. And to buy a new one, check out the collection of rain water tanks Bendigo.
Author bio: Noah Hughes is a home improvement blogger with multiple articles on rain water tanks Bendigo for making the home more convenient to live. Here, he discusses three preventive measures to follow after installing rain water tanks Victoria.