Steps for Proper Tree Lopping Service and more!
By knowing the fundamental steps of tree lopping service, you will have an idea of how tree lopping can be done as necessary to maintain its health and appearance. At the same time, you can also reduce any potentially dangerous dead branches that may fall without warning. Trees usually need lopping when you want to improve their looks. Or if some part of it becomes dangerous. Also, lopping controls the growth of the tree by chopping any branches that aren’t large enough to assume the main growth point.
Professional tree lopping service follows a set of steps to do the job. It’s a complicated process that requires the right set of materials and some experience. That’s because only a professional contractor can assess the risks. Not only that, but the contractor is responsible for any damages that may happen during the cutting. Which is why great care and consideration is a requirement for the task.
So, how do tree cutters go about lopping a tree? It’s no easy job so make sure you don’t try it without professional guidance. Nevertheless, for you to get an idea of how the arborist team should perform the process. Let’s discuss the steps for proper tree lopping.
Step 1 – Determining the height of the tree.
Knowing how tall the tree is important for professional tree lopping service. At the same time, professionals need to know how long each branch is and the weight that’s on it. Large trees require more work and more powerful tools, so expect a slight increase in price. Shorter trees aren’t necessarily less complicated either. The location of these trees. Plays a big part in performing the task.
Step 2 — Setting the direction where the tree or branches should fall.
Once the team gets the height, the next step is knowing where the tree or branches should drop. This area should ideally be free of any objects or living things nearby to avoid accidents. Also, there should be no fragile structures or pedestrians who appear out of nowhere during the cutting.
Step 3 – Clearing the area and prepping for cutting
The area where debris may fall is the “fall-zone”. This needs to be completely free of anything that is prone to damage. If it isn’t, then the next step is to move or get rid of everything. This may require the help of another company, such as a relocation service, to make sure nothing gets in the way during the scheduled cutting.
The preparation for tree cutting involves tying one end of the rope to the tree, somewhere around the middle or above the middle. Then the cutter will hold the other end of the rope. This method is also common for people who want to cut or lop their own trees. But for safety precautions, it’s always better to let the experts do it.
Step 4 – Cutting the tree
The popular approach to tree lopping service is by cutting a v-shaped notch into the tree. This cut should start on the side you want the tree to fall. Next, the arborist carefully starts another cut on the other side until it reaches the middle. As the tree or branch starts to fall, make sure that the “fall-zone” is clear. Sometimes, this cut part may hit other branches too. When this happens, the professionals will probably just tug on the rope to loosen it.
Other Tree Lopping Service Tips
Do not approach the drop zone if a branch or tree fails to fall completely. Tugging on the rope repeatedly often gets the job done. If not, then the cutter will likely have to deepen the cut until the problem part falls off. Again, this is dangerous work so it is highly recommended that you don’t do this yourself. There have been numerous cases of people getting injured or worse due to incorrect methods or lack of assessment. Opt to get a tree lopping service.
As you can see, tree lopping isn’t a walk in the park. But it doesn’t have to be dangerous either. Especially if you get a qualified group of Professional Tree Removal Service to take care of the job for you.