Water conservation is a necessity in the present times. There are plenty of areas in the world and particularly in Australia which is suffering due to the scarcity of water. So, you should try and think of ways in which you can save water. After all, water is not just what we need to sustain but it is also crucial for a number of tasks such as bathing, cleaning, washing, gardening, and other household chores. In such a scenario, one of the most popular and effective solutions would be to harvest rainwater by installing the underground poly rainwater tanks.
Underground water tanks are practical, functional, and easy to operate. These are found in a number of places and have been designed to provide optimal efficiency and strength along with an optional self-cleaning filter facility too. Are you worried about the prices? Don’t worry. There are various places where you can get poly rain water tanks sale. And even though most of these companies offer you an installation service, you should have an idea yourself too. That is why here, we have a step by step guide on how to install an underground poly rainwater tank. Take a look.
Dig the Hole & Lay the Foundation
First of all, you need to dig the hole for the tank. In order to make sure there is adequate space for working, the base area of the trench exceeds the dimensions of the tank by more than 100 mm on both sides. The site of the construction should be horizontal and plain, with the guarantee of the substantial capacity of bearing the load. Then, you have to lay a compact, round-grain gravel layer as the foundation of the tank. The requirements will differ from surface to surface such as different for sloping surfaces or surfaces adjacent to vehicle use. The professionals of a reputed company can further guide you with this.
Connect a Number of Tanks
You might want to connect two or more tanks if you are planning a greater rainwater harvesting. So, then these have to be connected with the help of the assembly surfaces by certain kinds of specialized seals and basic pipes. You have to drill the apertures to the corresponding size. But keep in mind that the distance between the tanks must be 500mm at least.
Inserting & Filling the Hole
Next, you have to insert the tank into the trench which we prepared without causing any impact. In order to prevent any sort of deformities, you can fill one-third of the tank with water before filling the surrounding of the tank, which is basically the layer of round grain gravel you applied at the first step. This surrounding has to be then filled in 300mm layers which are about 30cm steps and then compacted. You must keep in mind that the individual layers along with the medial support column have to be compact with precision involving manual tampering so that the tank does not face any damage. For more detailed instructions, you should resort to an efficient team of water tank installers.
So, without any further delay, quickly look for a company that offers such poly rain water tanks VIC or elsewhere in Australia.
Author Bio: Jerome Kennedy, a regular blogger on water tanks VIC, here writes on a few steps to keep in mind while installing underground poly rainwater tanks. He says that now you can also find many poly rain water tanks sale.