You bought a custom sticker for your vehicle from the online printer with the thought that you will use it to promote your brand or company. Now, you have to apply it on the surface to generate the actual effect. But you might be wondering whether you should do it yourself or hire someone for this job. The decision depends on the quantity and also how much you are ready to spend on this work. As such, a sticker is a low-cost investment, and it wouldn’t require a higher budget for its installation. Still, it is up to you to decide. If you are a DIY person, you can take this task upon yourself or ask your staff members to do it.
No matter whoever prepares for its application, the person has to be aware of the location of the vehicle where it would go. After this, other steps follow. Here is a quick glimpse of them.
Tips for applying a car sticker
Put the masking tape
Once you know where you have to place your decal, you can take the pieces of masking tape to outline the corners where the sticker would apply. It would leave no scope for confusion when you come with the label.
Clean the location
Wipe the area where you want your car sticker to go. Use a mild soapy solution and a soft cloth on the surface. Some people use alcohol also. Once you are done with the liquid-based part, smoothly rub the area with a fabric or allow the surface to dry a bit because car stickers don’t stick well if there is wetness.
Place the decal
When you get the sticker, make sure to notice its size. If it is too large, you may not want to peel off the backing in one go. It would be wise to remove it slowly portion-by-portion. Usually, stickers bigger than the forearms need careful handling. Otherwise, you can eliminate the backing. Anyway, considering that you have to approach it portion-wise, you can keep revealing the sticker while removing the backing by a few inches. The decal should be straight, and one side should not interfere with the other. Keep an eye on the progress, so the risk of errors get minimised.
Wait before peeling off the transfer tape
After you firmly place the decal on to the car’s surface, you may want to do away with the transfer tape quickly. However, it would help if you gave it some time for drying. After half an hour, you can remove it promptly. The decal will also be safe. Just make sure to check the surface once. When peeling off the transfer tape, the sticker can form bubbles. You can remove them with a squeegee or a plastic card. Push them to the edge of the decal, and they should disappear.
For ease of application also, many companies choose car decals and stickers for advertising and marketing purposes. These allow greater reach to audiences at an affordable budget. Plus, they tend to be durable. So, you can use them for an extended period.