Hot water systems are basically your lifesaver during the chilly winter months, or after coming back home from a tiring day at work. Mostly, people don’t need to replace it too often; and even if they do, it’s around every 8-10 years. So, this leaves most of the people with very little knowledge about their hot water systems, and which ones could be the best for them. Also, they have a tendency to go for like-for-like replacements. But, no worries, as we are soon going to make you feel empowered and totally informed about your water heaters.
Just what we talked about, when our hot water system conks out with a sudden bang, whimper, or even a flood etc., we replace it. And the suddenness of the situation doesn’t really allow us to have the luxury of going through different options. We just call up the plumber, and get ourselves the replacement of the same type, ASAP. Of course, nobody likes cold showers, and you forget about it until the next bang. But, what if you are missing out on a better product? That’s why you need to have a clear understanding of all your options. And when your hot water system goes through any malfunctions, call up efficient plumbing services in Perth like A. Able Plumbing and bid goodbyes to all your hot water troubles. They cater to all your repair, servicing, and maintenance needs of solar, electric, gas etc. water heaters.
Take your pick from the different kinds of hot water systems
Water heating accounts for around one-fourth of the household’s total energy use, and in some cases, may be even more. So, it’s very important that you carefully review the available options before taking your final pick. This can help you reduce your energy bills, and save up on money in the long run. And, you also needn’t worry about finding the correct service that offers hot water repairs in Perth. We already helped you with that, and it’s applicable no matter which kind of hot water system you own. So, now, just relax and take the best pick:
- Electric: An electrically heated water storage tank system is one of the most affordable options to go for. But, as inexpensive it is to buy and install, it’s quite expensive to run. Particularly, if it works and draws electricity for hours on end. Only, if there are decent sized solar panels installed, then only these heaters turn out to be quite efficient when run on a continuous daily basis. For those which run on and off, a larger tank is needed as the hot water has to last you all day. These heaters can be installed either indoors or outdoors.
- Gas: Natural gas is a good option to go for, and is much more cost-efficient than the electric ones, even in the absence of solar panels. These can heat water as and when required, as their rates don’t vary throughout the day. Usually, these are preferred to be installed outdoors for proper ventilation, but can be installed indoors too. LPG is also an alternative, but has slightly higher running costs as compared to natural gas.
- Solar: This water heating system consists of solar collector panels and a storage tank. A household consisting of four members should need about two panels and a 300ml tank. But, yes, you can get a larger tank to make up for days with lesser sunlight, or when in need of more number of hot showers. Though, they are relatively more expensive to purchase and install, their low running costs make them pay off in the long run.
- Heat Pump: This is a much more efficient version of the electric hot water system. It works on the same mechanism as that of a fridge or an air-conditioner. It extracts heat from the air, and uses it to heat up the water in the tank. It’s mandatory to install these in well-ventilated areas, generally outdoors. These heaters work better for warm and temperate regions.
So, these were the main types of hot water systems you can choose from. Make your decision based on your budget, energy-efficiency, space-availability, household needs, etc. and choose the best type for you and your family.