Do you ever wonder how Panel Beaters Melbourne to the job? You just take your damaged car to their agency and get repaired and well looking in return. This short guide will help you understand all their processes and how do they do it. So let’s get started!
Their entire process usually follows 5 steps:
- Shrinking and stretching
1) Shrinking and stretching
This process includes applying heat to the affected area of the panel with the help of a special Hammer to reshape the damaged metal. For reshaping and contouring, this process is used in combination with planishing so that the panel can get back to its original appearance and shape.
This process is called planishing because a planishing hammer is used to shape and smooth and the surface of a panel. This technique helps the professionals to push out the damaged metal which is pushed against a shipping tool called stake or Dolly.
Mixing welding, the only thing that comes in mind is to join metals together by melting pieces of it. The same is going to be followed for panel beating. Professional swelled the broken or damaged joints, melt it, wait for them to cool down so that the joint is stronger for the vehicle structure. However, there are many ways to weld, for example, a gas flame or an electric arc depends on the material you are going to join.
In this process putty is added to the filler write into the small holes on the surface of the metals so that the original shape and contours can be accomplished. But, one has to be careful with this process as the feeling person has to be fast enough to fill all the gaps as deputy dries out quickly and once it does, it becomes difficult to use it again. As the filling dries and hardens, it’s time to smooth and shape it with the sanding process.
This is the final process that is used to shape and even out the matter that you recently filled. All the uneven surfaces are sanded to achieve a different texture by changing the coarseness of the sand pad.
After the sanding is done, it’s time to paint the car and realign if required. For this process the car is placed on a hydraulic lift and properly aligned by ensuring the chassis and many other parts. This part is important as impact might have affected the underlying body of the car.
So that’s how a professional and experienced panel beater make your car new!
This process normally remains the same across the globe but some professionals might like to do it in their style.
So if you are about to hire a panel beater, ask them for the process they will follow for your vehicle and find out whether these steps are included or not.
So don’t just ready, hire the best Panel Beaters in Melbourne.