Linksys Extender is one of the best WiFi range extenders which amplify the signals of your existing router and broadcast them to each and every corner of home or office. No doubt Linksys router is the best technology-enabled networking device, yet there are few barriers like walls and floors that slow down the signals. In this scenario, Linksys WiFi range extender is the ultimate choice to go with. All you have to do is set up the extender and enjoy fast internet signals without any issue. In this post, we will guide you on how to set up an extender Linksys using WPS method. Read on.
What is WPS?
Before getting started with the setup process, you should know about WPS so that you can easily install and configure Linksys extender. WPS stands for WiFi Protected Setup which is a wireless network security standard to make connections between wireless devices and router. Traditionally, users would need to manually create an SSID and then manually enter the security key to prevent unauthorized access to their WiFi network. With WPS, it will automatically configure a network name and strong WPA data encryption and authentication.
However, to set up an extender Linksys using WPS, you will also need to press Linksys router WPS button. It is the easiest way to install a wireless range extender. There is no need to find out the SSID and security key while connecting WPS-enabled devices. No long sequences of passphrase to enter.
That’s what you need to know about WPS method. Now, you can get started with the extender setup process. Scroll down to read more.
Things to keep in mind before setting up Linksys extender
Let’s have a look at the must-have things before setting up a range extender:
- Given that a wireless range extender is a plug and play device, so it’s recommended you to reset the extender to default factory settings.
- Place the extender to a clean and tidy area and also far away from interference-creating objects like electronic appliances, metal objects, reflexive surfaces and a lot more.
- Use cuts-free Ethernet cable.
- Don’t mess its wires with other ones.
Once done with the above-said things, follow the steps below to set up the extender using WPS. There are 2 ways for installing an extender with the help of WiFi Protected Setup. You can either make use of the physical Linksys router WPS button or log in to web-based setup page. Here, you have to choose one of the three available options to configure WPS: WiFi Protected Setup button, WPS PIN and Client’s PIN.
- Using WPS Button
Press the WPS button on router. After that, press Linksys extender’s WPS button situated at the side panel. This will show that the extender is pairing with an existing access point or router. That’s it. The extender has been set up properly. But if you come across any kind of issue during installation, take immediate help from our highly-experienced technicians at toll-free 1-844-726-2255. They will guide you step-by-step to resolve the issue in a matter of minutes.
- Web-based WPS button
Here, you can use one of the following ways to get the job done:
- WiFi Protected Setup button
Open any of your preferred web browsers like Chrome, Firefox, Edge, Explorer and Safari and type extender.linksys.com in the address bar. Log in to your extender using username and password. When the page opens, click on WPS button. After that, click on enabled option. Doing so will set up your range extender within seconds.
- Using WPS PIN
In case your client device has a WPS PIN, open the web-based setup page and enter that number. Once done, click on register button.
- Using router’s PIN
Navigate to extender.linksys.com web address and log in to your extender. If your client requires the PIN of router, type that number in the provided field.
In this way, you can set up extender Linksys using WPS method. If you have any queries or issues, don’t feel shy to talk to our well-trained technicians. They are 24×7 available to help you out.