Oh Gosh, it seems that the straight razor world is taking control again! Have you ever listened to the Badger and Blade advertisement? If not, they will probably convince you to get a $100 strop, and $390 shaving brush undoubtedly! No doubt, this is the most expensive soap you’ve ever bought. The best straight razor for beginners can cost $50. This is nonsensical for some!
Sharpening a razor can be equally expensive. Some grit water stones can cost up to $4000. Here’s a list of some of the costliest shaving tools we can find on the marketplace that people find almost unaffordable:
- Norton – $80
- Shapton – $500
- Grit water stone
- Shapton ceramic glass stones – $680
Well, they are not unaffordable, they are just pricey.
They are, however, top-quality devices for sharpening straight razors from top to bottom. However, mind the fact that you will only need these tools once a year and no more.
The fact about strops:
Some people just don’t like strops because they find them too expensive and quite unnecessary. They think of the fact that they have to spend up to $20+ on shipping and other expenses they could perfectly avoid. This is quite understandable. They will probably never sharpen a razor in their lives. This is the kind of men who will always buy up to three disposable razors. Razors, like the ones most guys use, won’t keep their edge sharp professionally as we can do with straight razor models. Keeping this item in good condition can cost around $120 and that’s an amount of money that not every guy is able to pay.
Meet your own razor hone:
Of all the shaving elements, hones are the least expensive of all. $15 each and you will need like four during the year. Woodcraft has models affordable models like the ones of 6×12 leather hones for 3×6 strips. As a side note, you should never cut the leather with your razor. Use a penknife or any other sharp tool, not your blade. You can purchase your piece of lumber at any lumber yard. Then cut it to the perfect size. Save money whenever you can.
Making a homemade hone:
For making your own 15-dollar hone, you just need some glue, leather and wood. Elmer’s wood is best if you want to save money on hones. Buy rubber cement or glue; both can work perfectly. Sand the wood first to make sure no dust is there. Do this so you will be able to seal it to the leather properly. Take the glue and apply it to the surface of the wood. Do it from the top to the middle of it without coating the entire piece. Apply glue to the leather too. Then make pressure really well so no bubbles form. Do this with the other three leather pieces and you will get a homemade 15 dollar hone.
There are many ways to save on shaving tools. The above methods can do the trick for those who want to try. We hope this article will be helpful in finding your desired razor.
For more information, click this site.