The process of removing heat and warm air from the inside of a room to make the temperature inside the room cooler is called air conditioning. It helps in improving the comfort of your room and makes it pleasant. The cooling is generally produced by a rotating fan inside the machine which helps in circulating the cold air in the room, at times the cooling is also done by evaporation or free cooling also.
Different Types of Air Conditioner
- Window system air conditioner
- Split system air conditioner
- Packaged air conditioner
- Central air conditioner
What Is a Split System Air Conditioner?
It is an air conditioner which has two main units. One is kept indoor, while the other is the outdoor unit. The outdoor unit is fixed or installed on the outer wall of the room or the building. It is known as the compressor. The indoor unit is sleek looking which mainly consists of the cooling coil and the air filter as well.
Benefits of Split Air Conditioner System in Your House
A split system air conditioner has many benefits when compared to the traditional air conditioner and they are:
Unlike the traditional air conditioner, these split air conditioners do not produce noise. The compressor which makes most of the noise in an air conditioner is kept outdoors. Therefore, the room gets cooled without the noise of the machine or the fan of the condenser.
It is an efficient and cost-effective way of cooling your house. As it saves energy and electricity, thus cutting down your electricity bill. The longevity of the split unit is more than the traditional air conditioner.
In this system, a person can also choose a multi-split system, where one can have several indoor units all attached to one single outdoor unit. This is a great way of cooling all your rooms without installing several outdoor machines.
No damage to the wall
In the window air conditioner, the wall or the window has to be broken down to fit the unit as the compressor is attached to the main unit. Due to which a lot of space is needed to install the air conditioner. But in the split system air conditioner system the conditioner is detached from the cooling unit so you do not need to break down a wall or a window to install it.
How to Install a Split System Air Conditioner in Your House?
Setting up the indoor unit
To run through the pipes from the indoor unit to the outdoor unit you are supposed to cut a hole into the wall. So, choose a location or the wall which will allow you to do so. The indoor unit should be seven feet above the ground. Avoid locations where there can be a leakage or gas or oil. Keep it away from electrical wires of other electronic gadgets. Choose a central location.
Screw the mounting plates
The mounting plates should be against the wall where the indoor unit will be installed. Position it in such a way that the plates match the holes in the wall.
Connections and drill
You are supposed to drill a sufficient hole in the wall so that you can pass the tubes and pipes outside. Then check the power connections and make sure the wires are connected to the screw terminal properly.
Setting up the outdoor unit
Keep the outdoor unit away from direct sunlight and dust and damp areas. Connect the cables and tubes with this unit. The distance between the outdoor and the indoor unit should be around 50 feet. It should be protected from heavy rains and winds.
Seal the hole
Once the outdoor unit has been set up, seal the hole you made to take out the tube from the wall. So that warm air cannot get inside the room.
For the long-lasting, hassle-free service and better efficiency; proper installation of the air conditioner is crucial. For that matter, it is advisable to hire a professional technician for a split system air conditioner installation.
Now you know all the important thing about the split system air conditioner. Ensure to conduct small research prior to opting for the air conditioner. In that way, you can attain a bit of the depth understanding of the system associated.