Linksys WiFi routers are the best known to connect to the internet in today’s modern world. Through this device, you can connect multiple devices at the same time such as smartphones, tablets, computers, laptops, etc. This devices can be connected either a wireless or wired connection that completely depends upon your usage. If you wanna connect the Linksys device wirelessly, then consider using the network cards that are installed on computers and laptops. Alternatively, you can also connect the router using WPS button and go on with the task of Linksys Extender Setup.
Well, the WPS button is located on the bottom or back side of your Linksys WiFi router. In the informative post, we will definitely make you aware of every nook and cranny of Linksys router WPS button. Now, allow us to brief you.
- What does Linksys Router Button supposed to be?
WPS is known as WiFi Protected Setup. It is also well known as a security standard for wireless network that helps a lot in making easier, faster, and reliable connections between router and the wireless devices. This method only deals with those WiFi networks that consist of a encrypted password.
Important Note: During the setup process of Linksys range extender, you are supposed to connect it to your existing router physically with the help of an Ethernet cable. This will open Linksys WiFi Extender Login page and after that, you will be prompt for typing username and password (default).
Now, let us suppose that you need to connect a smart device to your home networking system. For this, what you are going to do? Give us the honor to guide you. There would be a need to select the network and after that, type in the security password.
Important Note: You will fail to connect to a network if you skip the aforementioned steps.
Well, that’s the work of WPS. WiFi Protected Setup makes the connection a easier and simpler process. How? Have a look below.
- How to Locate the WPS button on the Linksys WiFi Router?
Linksys WiFi routers are very well known for providing support for WPS security standard. On the other hand, they are also used to handle wireless connections as well. Nowadays, each and every model of Linksys arrives along with this button.
Most of the routers have the WPS button on the bottom side while others give it on the back side.
- How do we suppose to connect our Smart Device using WPS?
Well, there are two (2) important methods to connect a smart device to WPS. You can either log in to extender.linksys.com Support or use WPS button on your Linksys WiFi router physically.
- WiFi Protected Setup (WPS) Button
As already mentioned, this button can easily be located on bottom or back panel of your device. You have to simply press this button for few seconds and connect it with your Linksys range extender. Also, make sure that your router is running and using the latest firmware. On the other hand, make sure that your computer/ laptop is connected to the internet properly. In this creamy-smooth way, you can connect your router with the smart devices.
- Web-Based WPS Button
This process can easily be completed in three (3) simple ways. You can follow and go with any one of the three processes mentioned below:
- WiFi Protected Button
This button can be accessed easily via Linksys Extender Login page. To do so, turn on a computer/ laptop and connect it with your safe, secure, and reliable connection. After that, you have to launch a web browser and in the address bar type the default IP address of your Linksys range extender. Hit on the WPS section, as soon as the login page opens.
- Using the WPS PIN
If your device includes WPS PIN, then you are supposed to enter that number on Linksys Extender Router Login page. Once completed, tick the button mentioned on the website.
- Using The Linksys Router’s PIN
If there is a PIN given on your Linksys router, then you have to note it down immediately without any delay. Open an up-to-date web browser and visit the login page of your Linksys range extender. After that, enter the Pin into the required fields.
That’s it. Your smart WiFi devices are now connected to the Linksys router physically and successfully. If the WPS shows the solid green color, it simply means that the entire process is completed successfully without any trouble
On the other hand, you can also take assistance from our certified technicians. Just type in your queries in the below given comment section and we will guide you step-by-step in the best possible way to handle and solve your annoying issues.
If any step troubles you during Linksys extender setup through extender.linksys.com, feel free to dial our toll-free number 1-800-924-0563 and let our expert technicians help you out.