Carpets are very important to the house as they act as an insulator between the feet of humans and the floor. Carpets can get dirty very quickly so they must be regularly cleaned and well maintained sometimes general cleaning does not help eliminate pollutants from the carpet.
Carpet Dirt Removal After Cleaning
If the carpet is not cleaned properly it can become dirty very quickly. Here are some reasons why carpet gets dirty
- Failing to Vacuum Before The Carpet Steam Cleaning: – It is very important to vacuum the floor for loose particles before steam cleaning. If the loose particles are not removed, they can come in the surface of the carpet when it dries up.
- Not Pre-Spraying The Detergent: – In order to save time sometimes carpet cleaners put detergent into the cleaning solution being used. Hence it leaves a lot of detergent after the cleaning has been done. As a result the carpet becomes sticky and then there is the dust particles which makes the carpet becomes dirty after cleaning. Therefore, the reason there is always the necessity of pre spraying the detergent before cleaning so it does not leave a sticky residue but also allows for the detergent to work before the steam cleaning starts.
- Failure to Rinse: – Whenever there is the carpet cleaning done quickly some of the carpet cleaners do not rinse the carpet hence leave a sticky residue on the carpet which attracts dirt and they stick to the carpet which makes the carpet look like it has not been cleaned after a short amount of time.
- Too Much Water on Lighter Carpet: – Most of the carpets have jute backing which reacts with water. The jute is brown in colour and if too much water is used on the carpet cleaning equipment is not set to the correct pressure, water goes to the jute backing and then when the water disappears then brown colour wick to the end of the carpet yarns. The process is called browning and can take quite a bit of effort to remove later on.
These errors in the carpet cleaning process can take place when the carpet cleaning professionals are not properly trained.
There are stains that resurface as a result of wicking are originate below the carpet fibres. The original stain has not only soiled the carpet fibres it has also penetrated the carpet backing and underlying pad.
When there is the requirement of removing a stain the carpet may have received too much moisture while rinsing the carpet. An excessive rinse can saturate the area and allow water to penetrate the carpet backing and pad. The water that is rinsed then mixes with the deep stain and becomes dirty and discoloured. Some of the dirty water is taken out of the carpet during the extraction portion of the cleaning process while many of it remains behind carpet backing and pad. When the moisture evaporates the carpet dries and the dirty water wicks into the carpet fibres. The once deep stain rises to surface when it becomes visible.
When spots and stains reappear as soon as the carpet dries wicking is the main reason.
Stains that reappear as a result of residue originate within the carpet fibre. Some of the soap, as well as shampoo and other cleaning agent used in traditional cleaning process, gets left behind in the carpet. Even after the carpet dries the residue remains. Whenever someone walks on the carpet the soil from shoes sticks to residue in carpet fibres. Any settling dust particles will follow the residue in the carpet. When carpets are cleaned with traditional methods it becomes re-soiled very quickly. So even when there is vacuuming done the soil stuck in the residue within the fibres would not be released.
Carpet Cleaning at an Affordable Price. Hire Us
Carpet gets dirty after steam cleaning due to the factor that Carpet Cleaning in Brisbane personnel are not adequately trained in the job they are trying to do or the cleaning professional tries to find an easier way but the incorrect way to clean the carpet.
Please contact Tip Top Clean Team services for clean your carpet. We can provide professional carpet cleaning at a time convenient to you.